ThermaTouch - Starting PowerFlush (ver. 8.0 - 8.4.4)

Your steam generator has a cleaning feature that is called PowerFlush. This cycle is designed to break up any calcium and/or sediment that may collect inside of your generator. This build-up can cause the unit to experience water blockage and certain parts to wear out. ThermaSol recommends that you perform a Power Flush cycle at least once a month to extend the life of your generator. Your generator will require a PowerFlush to run after 1000 minutes of usage.

Step 2:

Touch either User

 

Step 3:

 

Touch the Settings icon then from the EQUIPMENT menu select GENERATOR

 

Step 4:

Touch POWER FLUSH

This cycle will run for up to 45 minutes. During the first part of the cycle, you will notice water begin to flow from your steamhead into the shower drain. This is normal and will allow any debris to be flushed out of the system. Once this portion of the cycle has completed, your generator will automatically switch to a steam session and run for the remaining time. 

If for any reason you are unable to complete the Power Flush cycle and you receive the Low Water error again on your control and the water inlet screen has been cleared of any debris please call us at 800.776.0711.